Igwe Igwe Igwe Ọdụdọ na-adịgide adịgide

Usoro HD

Ọhụrụ HD usoro magnetik hoist, site na imewe ọhụrụ, nwere ihe nchekwa nke ihe karịrị ugboro atọ nke esemokwu.A na-eji ihe dị elu na-adịghị ahụkebe neodymium iron boron ihe n'ime ime iji hụ na ọ bụ ezie na olu dị ntakịrị, ọ nwere esemokwu siri ike, ọnụ ala na ọnụ ahịa dị elu.Ụlọ ọrụ anyị ji ezi obi na-akwado gị ya.
Ala ahụ na-anabata usoro nke nwere ụdị V, nke nwere ike ibuli ma efere ígwè dị larịị na efere nchara gburugburu.

Usoro PML

Ka ọtụtụ afọ nke asambodo ahịa gasịrị, e rerela ngwaọrụ ihe na-ebuli ihe ndọta PML nke ọma na mba 80 gburugburu ụwa wee too ya nke ukwuu.
A na-eji ihe ndọta NdFeB arụrụ arụ ọrụ dị elu.Arụmọrụ dị oke elu na-eme ka o doo anya na igwe ihe ndọta nwere ike inwe ike ibuli elu ka ọ dị obere.Ihe nchekwa na-agafe oke esemokwu site na ugboro 3.5 bụ ọkọlọtọ kachasị elu na ụlọ ọrụ ahụ!

Usoro HC

Usoro HC nwere ike mezue nu na ntọhapụ nke akpaka okirikiri site n'onwe ya na-enweghị eletriki ọkọnọ, nke na-arụ ọrụ dị mfe, na-eji mma na a pụrụ ịdabere na.A na-eji ya eme ihe n'ịkpụzi ihe, n'ichepụta usoro na ọdụ ụgbọ mmiri.Enwere ike iji ya mee otu, ma ọ bụ jikọta maka nnukwu efere ígwè na ogologo ogologo, billet ígwè ma ọ bụ ígwè ndị ọzọ.Ọ nwere ogologo ndụ bara uru, na ọ bụ ezigbo ebuli akụrụngwa nke ịzọpụta ume.

Usoro HX Magnetik Chuck na-adịgide adịgide

Mgbanwe pịnyere na-adịgide adịgide magnetik clamping block bụ ọdabara na nnukwu igwe igwe na-egwe ọka, igwe kwụ ọtọ na kwụ ọtọ CNC jikọtara ọnụ na igwe igwe igwe.Ọ bụ ọdabara na nhazi nke nnukwu na ọkara-sized workpieces.Ọ nwere ike machie workpieces ngwa ngwa.Enwere ike iji ya maka nhazi nhazi 5-Sided.Enwere ike ịmecha ihe ọkụkụ, ịkụ aka na igwe igwe n'otu oge, na-echekwa usoro nhazi, na-ebelata nnabata ugboro ugboro nke usoro nhazi oke na imeziwanye arụmọrụ ọrụ, belata ọnụ ahịa nhazi.Usoro ihe nrụnye HX nwere ike ijikọ ọnụ ọgụgụ, ọnọdụ na oghere nke magnetik worktables dị ka nha workpieces si dị, ma kwadebere ya nke nwere ike dochie anya "ihe mgbochi nro nro magnetik".Ọ nwere ọtụtụ ọrụ na ike mere dị ka mkpa nke dị iche iche workpieces.

Usoro HB

Usoro HB bụ usoro ihe nrụpụta magnetik na-adịgide adịgide kachasị ọhụrụ nke nyocha onwe ya na mmepe nke ụlọ ọrụ anyị, na-arụ ọrụ dị mfe na nke ziri ezi, ọ bụ ihe ọhụrụ nke usoro HC mbụ.Njirimara ya:
1) ahịrị multi-axis na-amalite njikọ njikọ gia, nkwekọ siri ike na nkenke;
2) na-enweghị swing ogwe aka push ngwaọrụ, ịnakwere-drive mode, nkwụsi ike bụ magburu onwe;
3) ịwụnye ihe ọhụrụ "mgbanwe anya" switchdevice, nu na ntọhapụ, doro anya na ilekiri.

Usoro mgbachi HE

Kwesịrị ekwesị maka igwe na-egweri elu, igwe ọkụ na igwe ịcha waya.
Oghere oghere ndọta dị mma na ike ndọta na-ekesa nke ọma.Mgbe machining mkpa na obere workpieces, mmetụta doro anya.Ọ dịghị mgbanwe na nkenke nke worktable n'oge magnetization na demagnetization.
Mgbe ọgwụgwọ pụrụ iche gasịrị, panel ahụ enweghị nkwụsịtụ, nke nwere ike igbochi mmebi nke ịcha mmiri, mee ka ndụ ọrụ nke diski dịkwuo ogologo, na-arụ ọrụ n'ịcha mmiri ruo ogologo oge.
Six elu-egweri usoro, ọ ga-eji kwụ ọtọ na on-line ọnwụ igwe ngwá ọrụ.A na-eji ígwè magnetik arụ ọrụ dị elu na diski ahụ, na-enwe nnukwu nsị na ọ fọrọ nke nta ka ọ bụrụ na ọ dịghị ihe ndọta.

HY PERMANENT MAGNET ELECTRIC SUCTION Series

* Enwere ike iji akụkụ ise maka nhazi, usoro ọrụ ahụ dịkwa ole na ole ma dị mfe.
* Gbaa mbọ hụ na iji nchekwa, enweghị okpomọkụ dị n'ime yana enweghị nrụrụ
* The clamping ogo nke dum ụgbọelu bụ edo, na machined n'elu bụ ndị ọzọ ire ụtọ, nke nwere ike n'ụzọ dị irè melite ngwá ọrụ ndụ na hụ na ezi repeatability.
* Gbaa mbọ hụ na mgbanwe nke ịcha, njigide ngwa ngwa na nnọchi ngwa ngwa nke igwe arụ ọrụ.Nhicha nke site na oghere dịkwa mma nke ukwuu, nke nwere ike nweta akụkụ clamping na multi angle ịkpụ.
* Mpempe ndọta na-achịkwa onwe, nke nwere ike ijide ma na-akwado ọrụ arụ ọrụ oge niile.
* Ọ nwere ike mpịachi nke na-ezute ma ọ bụ ọbụna karịa usoro igbutu achọrọ.